URE‑FIL™

Urefil15xx ⓘ 88AD519B-90A0-CF43-9D90-06380247C12A
Fillers
€ 111,39

(€ 92,06 zonder 21% btw)

Op voorraad

Beschrijving

URE-FIL™ 17 pure aluminum pellet fillers can be used with Smooth-On® liquid epoxy and urethane resins to improve thermal conductivity, dimensional stability, reduce shrinkage in large mass castings, etc. These fillers can also be used to add evenly distributed weight to metal cold-castings and to create artistic casting effects.URE-FIL™ 17 are small grain aluminum pellets 400 micron. Smaller grain pellets will settle into areas of detail better, reducing voids between particles. FEATURES- Can be added to aluminum-filled urethane and epoxy resins for vacuum forming applications to increase thermal conductivity (even heat distribution) when casting parts for applications with higher temperature requirements.- Will add evenly distributed weight to metal cold-castings to simulate the feel of solid metal reproductions at a reduced expense compared to metal foundry castings.- Will lower exothermic (heat) temperatures during cure cycle (see chart on reverse side), which reduces the shrinkage rate resulting in improved dimensional stability in large mass castings.- Can be added to liquid urethane and epoxy resins to create metallic visual effects when used with clear and colored liquid plastics.- When fully cured, resin filled with URE-FIL™ 17 & 19 can be cut, drilled, turned and machine tooled.- Should not be used as fillers in RTV rubber products.

Instructies

Specificaties

URE-FIL 3 Mix Ratio 1A:1B:1 part URE-FIL 3
URE-FIL 5 Mix Ratio 1 part filler with 1A:1B Smooth-Cast 320 resin
URE-FIL 7 Maximum Mix Ratio 1A:1B:2 parts filler
URE-FIL 7 Trowelable Mix Ratio 1A:1B:3 parts filler
URE-FIL 9 Oven Temperature For Moisture Removal 150°F / 60°C
URE-FIL 9 Oven Time For Moisture Removal 4 hours
URE-FIL 9 Thickness For Moisture Removal 0.95 cm - 1.25 cm
Beschikbaar in Fillers
Product URE-FIL 3 Mix Ratio URE-FIL 5 Mix Ratio URE-FIL 7 Maximum Mix Ratio URE-FIL 7 Trowelable Mix Ratio URE-FIL 9 Oven Temperature For Moisture Removal URE-FIL 9 Oven Time For Moisture Removal URE-FIL 9 Thickness For Moisture Removal Storage Temperature Recommended Mix Ratio By Volume Baking Temperature For Moisture Removal Baking Time For Moisture Removal Particle Thickness For Baking
URE‑FIL™ 1A:1B:1 part URE-FIL 3 1 part filler with 1A:1B Smooth-Cast 320 resin 1A:1B:2 parts filler 1A:1B:3 parts filler 150°F / 60°C 4 h. 0.95 cm - 1.25 cm - - - - -
Quarry Tone™ Fillers - - - - - - - 73°F/23°C 1A + 1B + 2 Parts Powder Filler 150°F/60°C 4 h. 0.6 cm

Waarom kopen bij FormX?

Schrijf je in voor onze nieuwsbrief

Ontvang € 5,- korting op je eerste aankoop!

Visa logo iDeal logo Mastercard logo Paypal logo FedEx logo FedEx logo
Deze website is ontwikkeld door Usecue B.V.
© 2026 FormX B.V.