SO-Cure™
Koop Smooth-On bij FormX
Smooth-On is een van ’s werelds toonaangevende fabrikanten van 3D-modelleermaterialen, zoals materialen voor het maken van mallen, gietwerk en speciale effecten, maar ook industriële gietharsen, lijmen en apparatuur. FormX is de belangrijkste distributeur van Smooth-On-producten in Europa.
SO-Cure
SO-Cure versneller voor PU-hars
Producten
SO-CURE™
...
Technische bulletins
Veiligheidsinformatie
Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature (23°C). This product has a limited shelf life and should be used as soon as possible.
Instructies
MEASURING & MIXING…
The accelerator is added to Part B by weight and should be thoroughly mixed with Part B before adding Part A. Important: Adding the accelerator drastically reduces the pot life (time you have to mix and pour material) of the liquid plastic product.
Example: To reduce the demold time of Task® 4 from 16 hours to 1 hour, add 2.5 grams of accelerator to 100 grams of Task® 4 Part B. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 100 grams of Part A and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your Pot Life is about 5 minutes. In one hour, the plastic casting can be demolded from the original mold. Ultimate physical properties will be reached overnight.
