Silpoxy Adhesive
Sil-Poxy© Silicone Lijm
Sil-Poxy© is een een-componentige lijm die speciaal voor het lijmen van RTV siliconen rubber om siliconen rubber en andere substraten, waaronder sommige kunststoffen (urethaan), gips / keramiek, textiel, enz. Sil-Poxy © werkt met tin of platina-uithardende siliconen en levert een sterke, flexibele band tussen siliconen onderdelen met een hoge rek. Sil-Poxy © kan worden gebruikt om reparaties in gescheurde siliconen rubber mallen te maken. Andere toepassingen zijn onder meer het verlijmen van siliconen voor protheses en animatronics.
Sil-Poxy © - 12 minuten uithardingstijd.
Producten
Sil-Poxy™ Adhesive
...
Technische bulletins
Instructies
Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.
Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.
A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.
Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.
Dispensing - Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly.
Applying - Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour. Full cure is attained after 24 hours. Warmer temperatures (and higher humidity) will result in a faster cure. Lower temperature will retard cure.
